Electricity Consumption
Calculator Pakistan
Enter any appliance’s wattage and daily running hours to see exactly how many units it adds to your bill each month — the AC, the water pump, the fridge, whichever one you suspect. Find the real culprit before you cut the wrong thing.
Electricity Consumption Calculator
Calculate your monthly usage based on average appliance power ratings.
Consumption Summary
| Monthly Units | 0.00 kWh |
|---|---|
| Estimated Cost (Rs) | Rs. 0.00 |
| Grand Total (Inc. Taxes) | |
| Rs. 0 | |
Electricity Consumption Calculator Pakistan — Monthly Usage Estimator
Most people only find out which appliance is driving their bill up after the bill arrives — by then it's too late to do anything about that month. This calculator flips that around: enter any appliance's wattage and daily running hours, and see its monthly units (kWh) before the meter reader shows up. Run it for the AC, the water pump, the fridge — whichever one you suspect — and you'll know exactly where your bill is coming from.

How It Works
You only need two numbers per appliance:
- Wattage (W) — printed on the appliance's label or in its manual. A 1.5-ton non-inverter AC is typically around 1,500W; a ceiling fan is closer to 60–75W.
- Hours used per day — your actual average, not a guess. Be honest here; this is the number that decides the result.
Enter both, and the calculator applies the standard formula:
(Watts × Hours used per day × 30) ÷ 1,000 = Monthly units (kWh)
kWh is the unit your bill is actually built on, so this number tells you directly how much that appliance contributes to next month's total.
Worked Example
Take a standard 60W ceiling fan running 10 hours a day:
(60W × 10 hours) ÷ 1,000 = 0.6 units per day, or about 18 units a month.
That's one fan. Now compare it to a 1,500W AC running the same 10 hours: (1,500 × 10) ÷ 1,000 = 15 units a day, or 450 units a month — 25 times more than the fan. This is why "turn off the lights" advice barely moves your bill, while AC hours make or break it.
One appliance's units don't tell you the rupee cost on their own — that depends on where your total household usage lands across the tariff slabs. Once you know an appliance's units, add it to your other usage and run the total through our Bill Calculator for the actual amount.
Why This Is Worth Doing Every Month, Not Just Once
Checking consumption only when the bill shocks you means you're always reacting a month too late. Running this calculator regularly does two things:
It finds your "phantom load." TVs, chargers, and monitors left plugged in still draw power even switched off. It's rarely the biggest number on its own, but across a household it adds up — and it's pure waste since nothing is even being used.
It lets you compare before you buy. Old fridge versus new inverter model, regular bulb versus LED — running both through the calculator turns a vague "inverter appliances save money" claim into an actual monthly-unit comparison for your specific usage pattern.
Four Things That Actually Move the Number
- Unplug what's not in use. Phantom load from chargers, TVs, and monitors left on standby is small individually but adds up across a household — and costs you for literally nothing.
- Switch to LEDs. They use roughly 80% less power than old incandescent bulbs and last far longer. Lighting is one of the few upgrades that pays for itself quickly.
- Service your AC and fridge. A dusty AC filter or a fridge with a poor door seal makes the compressor work harder for the same cooling — higher consumption for no extra comfort. This is usually the single highest-impact tip on this list.
- Check consumption monthly, not just when the bill lands. A sudden jump in one appliance's expected units versus last month is often the first sign it's failing or was left running longer than usual — catching it early is cheaper than catching it on the bill.
Related Tools
- IESCO Bill Calculator — turn your total units (from this calculator, summed across appliances) into an estimated IESCO bill with tax and FPA included.
- Electricity Bill Calculator Pakistan — the general version for any DISCO, using the national NEPRA tariff.
- Solar Panel Calculator — if your monthly units are consistently high (300+), this estimates the solar system size that would offset them.
Take Control Before the Next Bill Arrives
The appliances are what's actually costing you money — the bill is just where that cost shows up a month later. Run your biggest suspects through the calculator above, add up the totals, and check them against the Bill Calculator to see the real rupee impact before the meter reader gets to you.
